Skip to content

Discounts and More this upcoming Fall!

Discounts and More this upcoming Fall!

    Check Your SpO2 & PR With A Finger

    $18.00

    This device is for Sports and Aviation use only and not intended for medical use. 

    You May Also Like

    Track your oxygen levels every second.

    O2Ring™ Ring Oxygen Monitor

    OLED 

    Display

    Automatic 

    Power Off

    Reliable O2 & 

    PR Readings

    Light, Compact & 

    Sleek Design

    One-Button 

    Operation

    Low Battery 

    Indication

    The Finger Pulse Oximeter measures oxygen saturation in blood and pulse rate, displaying precise parameters with figures, pulse bar and waveform.


    Suitable for almost any age from children (>20kg) to adults. 

    Intelligent Design. Simple Operation

    The light-weight product is easy to use. Switch it on by pressing the sole button. In seconds the bright OLED display will give an accurate readout of blood oxygen levels and pulse rate. It will power off automatically 8 seconds after the finger is removed.

    Small But Accurate


    The pulse oximeter comes ready right out of

    the box. After popping in batteries (2xAAA included), it’s all set to go.  The device has a

    clean look and trendy design. It’s small

    enough to be put in a pocket and taken with you anywhere.

    Easy Steps To Operate

    Clip

    Open the clip and put finger inside, 

    clip the finger.

    Press

    Press the operating button

    to switch on. 

    Measure

    Measurement starts automatically, result is shown on screen.

    Know Your Oxygen Saturation Levels Effectively

    Put your finger in and enjoy the reliable readout fairly quick. If you need a hassle-free pulse oximeter, you can never go wrong with this one.

    Specifications

    DEVICE WEIGHT

    2.12oz/60g


    OXYGEN LEVEL RANGE

    70~99%


    PR WARNING THRESHOLD

    High/Low: 120bpm/50bpm

    DEVICE DIMENSIONS

    1.30'' x 1.42'' x 2.28''


    PULSE RATE RANGE

    25~250 bpm


    PROBE LED WAVELENGTHS

    660(±6)nm/IR: 905(±10)nm

    DISPLAY TYPE

    OLED, 0.96'', 128x64 Pixel


    SPO2 WARNING THRESHOLD

    Low value warning: 88%


    POWER SUPPLY

    2 x AAA alkaline battery; 3.0V DC

    Note: The Finger Pulse Oximeter is intended for measuring the pulse rate and functional oxygen saturation (SpO2) through finger, and indicating the pulse intensity by a bar-graph display. The device is intended for use in non-clinical contexts such as aerobic exercise, high-altitude climbing, and aviation. It is not designed to diagnose any medical condition or to be used for any medical application. It is designed for use by people ages four and above. Before use, please carefully read and understand all cautions, warnings, and operational manuals.

    FAQ

    What's SpO2?

    SpO2 means the saturation percentage of oxygen in the blood.

    What's the normal range of SpO2 value for healthy people?

    The normal range varies by individual, but usually over 95%, otherwise, please consult your physician.

    Why do the display value of SpO2 and PR vary with time?

    The measured SpO2 and PR value changes in correspondence with the change of patient's physiological conditions.

    hat to do if there is no SpO2 and PR reading?

    Do not shake the finger, and keep calm during the measurement. Please also avoid the Oximeter and the cuff on the same limb for blood pressure and oxygen saturation measurement simultaneously.

    What to do if the Oximeter is moistened or sprayed by water?

    Remove the batteries immediately and dry the Oximeter completely with a hair dryer.

    How to confirm that the SpO2 reading is true or accurate?

    Hold breath for a while (50 seconds or more), if the SpO2 value significantly decreases, it means that the SpO2 reading truly reflects the physiological condition change.

    Why do the display value of SpO2 and PR vary with time?

    When to replace the batteries?